Introducing ICCONS New and Improved Foamflo Range!

25 May 2021
Introducing ICCONS New and Improved Foamflo Range!
On this page

Foamflo® F750 is an 'all in one' professional expanding Polyurethane filling foam that expands on contact with moisture in the air. Equipped with a nozzle, no dispensing tool required. Foamflo® F750 can be used for both internal and external applications and is ideal for filling gaps and large cavities. Foamflo® F750 seals and will reduce noise pollution; insulate and provides a barrier for dust, insects and some pests from entering into penetrations. Foamflo® F750 should be cut, sanded, plastered and painted after it is fully cured; it has strong adhesion to most surfaces and does not shrink.

  • Filling of holes
  • Sealing and connection of joints
  • Reducing the impact of thermal bridging
  • Insulation of penetrations
  • Sealing thermal & acoustic insulation boards
  • Glueing sills, sidings, plasterboard details etc.
  • Sealing in roof-wall area


Foamflo® FT750 is a professional expanding Polyurethane filling foam that expands on contact with moisture in the air. It is used in conjunction with the FT-PROTOOL which provides optimum control of the flow of the foam and can be manually adjusted to suit the application. Due to its low post-expansion properties, the Foamflo® FT750 and FT-PROTOOL system allows more precise controllable filling and is a more economical system than manual foams as there is generally far less wastage. Foamflo® FT750 can be used for both internal and external applications and is ideal for filling gaps and large cavities. Foamflo® FT750 seals and will reduce noise pollution; insulate and provides a barrier for dust, insects and some pests from entering into penetrations. Foamflo® FT750 should be cut, sanded, plastered and painted after it is fully cured; it has strong adhesion to most surfaces and does not shrink.

  • Sealing window and door frames
  • Sealing thermal & acoustic insulation boards
  • Reducing the impact of thermal bridging
  • Sealing and connection of joints
  • Insulation of penetrations


Foamflo® FIRE is a professional fire retardant Polyurethane filling foam that expands on contact with moisture in the air.

GENERAL APPLICATIONS

Foamflo® FIRE is ideal for filling gaps and large cavities. It has strong adhesion to most surfaces and does not shrink.

FIRE RESISTANT APPLICATIONS

Foamflo® FIRE has been tested as a linear gap sealant in concrete block and concrete walls (contact ICCONS for report details). Foamflo® FIRE is an excellent thermal and acoustical insulating material. Ideally, Foamflo® FIRE is used at room temperature and not below 5°C or where surfaces are effected by frost or ice and not above 30°C. Ideally suited for use on concrete, brick, timber and metal surfaces, Foamflo® FIRE will adhere best on surfaces that are free from excess dust and do not have grease or oil present. Dampening surfaces with a sprayed mist of water will assist the expansion performance of the foam and large deep cavities will require to be layered in.


Foamflo Cleaner - Acetone based solvent cleaner for clean up of expanding foams

  • Cleaner for FoamFlo Dispensing Tools
  • Dilutes Uncured Foam
  • CFC Free


FT-PROTOOL Teflon coated with stainless steel barrel and needle, aluminium adjuster for easy control. Foam application has never been easier to perform and clean up.